2107985 Drive Roller

Product Introduction:

The drive roller of a milling machine is the key part that transfers power. Its main job is to turn the milling drum and pass on the cutting force. It is usually made of strong alloy materials, with a special surface that resists wear, so it can handle constant hits and rubbing from hard materials like gravel and asphalt when working. Inside, accurate bearings and gear systems keep power moving smoothly, and an oil system helps reduce wear during use.For daily use, you should often check how much the drum's surface has worn down, quickly clean away dirt, and keep heat escape paths open to stop it from getting too hot. When doing maintenance, focus on keeping the bearings oiled and the seals tight to stop sand or dust from getting in and harming the parts. Taking good care of the drive roller not only makes it last longer but also keeps the milling work going without stopping and makes sure the road surface is treated exactly right. This is the basic need for the machine to work well.

How to check the drive roller surface wear condition?

To check drive roller wear, use simple and easy methods. First, look at the surface carefully for scratches, cracks, or paint coming off, especially checking edges and corners for rough spots or dents. Compare what you see with old photos or records to understand how bad the wear is. Then, feel the surface with your hands to find uneven areas, and shine light from the side to see small wear marks better.When the machine is running, listen with a stethoscope for strange rubbing sounds - loud, sharp noises might mean some parts are wearing too much. At the same time, record how the machine shakes. Study these shaking records to see if wear is even across the roller.Take photos of the roller often to keep records. Looking at these photos over time helps you see how wear gets worse and plan when to fix it. If you see serious wear in one spot, sudden deep marks, or metal cracks forming, stop working right away and check everything carefully to avoid more damage.

What measures can be taken to prevent drive roller wear?

Check the drive roller's surface carefully every day before and after work. Look at it and feel it with your hands to find scratches, cracks, or uneven spots. Use light from the side to see small wear marks better. Always clean off dirt stuck to it and make sure to oil the bearings and moving parts well. This stops rough dirt from making parts wear out faster.When using the machine, never go over its weight limit. Try to avoid starting and stopping too often, and don't let it carry too much weight. Listen to the sounds it makes and check how it shakes to find wear problems right away. If you notice rough edges, uneven wear, or strange noises, stop working and fix it immediately.Make plans to change weak parts like rubber covers before they break. This helps prevent problems caused by wear and tear.

Product Parameters