2143056
JESTIN
Availability: | |
---|---|
Quantity: | |
Product Introduction:
The 2143056 0.5M power supply spiral cable for this milling machine's depth sensor should not be bent or twisted too much during use. Always check its surface for wear or cracks before and after operation. When moving the equipment, do not pull the cable hard—let it stretch naturally along the spiral direction to avoid damaging the internal wires. After working on rainy days, dry any water on the cable quickly. When storing, coil it neatly and do not let heavy objects press on it. It works with W200 and W195 milling machines and has a 10-pin 10-hole bayonet connector.
What are the precautions for the installation of this spiral cable?
When installing this spiral cable, make sure the equipment is turned off to avoid electrical dangers. Before connecting, check if the plug and port are clean and undamaged. Then insert it gently in the right direction until you hear a click. Let the cable hang loosely—don’t stretch or squeeze it too much. After installation, test its flexibility by hand. Keep it away from hot parts or sharp edges, and leave enough space for bending at turns. Check the fasteners regularly to see if they’re loose, and wipe off moisture after using it on rainy days. If there’s unusual heating or signal problems, stop using it right away and check it.
What is the purpose of depth sensor?
The milling machine depth sensor acts as the smart control center for road construction. It constantly monitors the cutting depth between the drum and the pavement to ensure working precision. Using real-time data feedback, it automatically adjusts the equipment's downward pressure, preventing over-cutting or under-digging that might happen with manual operation. Great for precise asphalt removal and surface leveling, this tough sensor can resist vibrations and dust, working reliably in harsh job sites. When paired with spiral cables, it ensures stable signal transmission, reducing material waste and rework caused by depth errors. Its modular design allows quick maintenance and fits most milling machine models, making it a must-have for efficient, high-quality roadwork.
Product Parameters
Part Name | Spiral Cable |
Interface | 10 Pin-10 Hole |
Part Number | 2143056 |
Applied For | W200/W195 |
Weight | About 1 kg/pcs |
MNQ | 1pcs |
Machine | Milling Machine |
Product Introduction:
The 2143056 0.5M power supply spiral cable for this milling machine's depth sensor should not be bent or twisted too much during use. Always check its surface for wear or cracks before and after operation. When moving the equipment, do not pull the cable hard—let it stretch naturally along the spiral direction to avoid damaging the internal wires. After working on rainy days, dry any water on the cable quickly. When storing, coil it neatly and do not let heavy objects press on it. It works with W200 and W195 milling machines and has a 10-pin 10-hole bayonet connector.
What are the precautions for the installation of this spiral cable?
When installing this spiral cable, make sure the equipment is turned off to avoid electrical dangers. Before connecting, check if the plug and port are clean and undamaged. Then insert it gently in the right direction until you hear a click. Let the cable hang loosely—don’t stretch or squeeze it too much. After installation, test its flexibility by hand. Keep it away from hot parts or sharp edges, and leave enough space for bending at turns. Check the fasteners regularly to see if they’re loose, and wipe off moisture after using it on rainy days. If there’s unusual heating or signal problems, stop using it right away and check it.
What is the purpose of depth sensor?
The milling machine depth sensor acts as the smart control center for road construction. It constantly monitors the cutting depth between the drum and the pavement to ensure working precision. Using real-time data feedback, it automatically adjusts the equipment's downward pressure, preventing over-cutting or under-digging that might happen with manual operation. Great for precise asphalt removal and surface leveling, this tough sensor can resist vibrations and dust, working reliably in harsh job sites. When paired with spiral cables, it ensures stable signal transmission, reducing material waste and rework caused by depth errors. Its modular design allows quick maintenance and fits most milling machine models, making it a must-have for efficient, high-quality roadwork.
Product Parameters
Part Name | Spiral Cable |
Interface | 10 Pin-10 Hole |
Part Number | 2143056 |
Applied For | W200/W195 |
Weight | About 1 kg/pcs |
MNQ | 1pcs |
Machine | Milling Machine |